|ISE Module with 4 electrodes||Li2+, Na+, K+, Cl- Up to 700 tests/hour with ISE.|
|Net Dimensions||78 cm x 64cm x 54cm|
|Net Weight||50 Kg|
|Gross Dimensions||94 cm x 79 cm x 80 cm|
|Gross Weight||80 Kg|
Perform more than 100 tests per hour in routine mode (PT+APTT+TT+FIB). The analyser optimizes the use of cuvettes racks to get the highest speed and the most reliable results.
The very low dead volumes (0.2mL) saves reagent. Racks with unused cuvettes are returned to be used later for remaining cuvettes.
Light and sound alarms, automatic reruns, permanent check of any signal anomaly, automatic volumes checks by level sensor… all functions are available for the easiest use.
A production respecting the highest quality standards ensure the best reliability for such analysers. All European components are used to build this robust system.
32 patient positions, 16 reagent positions, 8 control and calibrator positions and racks magazine for 464 tests – all give the best autonomy to the analyser.
Add reagents, samples, STATS, anywhere, anytime! or install several vials for a same parameter on board. Use large or small original reagent bottles, or even “Hitachi cups” for very small volumes of reagent.
|Throughput PT+APTT+TT+FIB||100 tests/h|
|-||Random access processing (Patient oriented)|
|-||Continuous operation and Stat management|
|-||8 measuring channels|
|2 wavelengths||Red : 620nm, Blue : 405nm|
|-||Chronometric, Chromogenic and immunologic tests|
|Sample tray||2 positions for samples + 4 dedicated positions for calibrators|
|-||Sample cups or primary tubes|
|internal barcode reader||optional|
|Reagent tray||16 positions + 4 dedicated positions for quality controls|
|-||Reagents are kept at 17°C for optimal performances|
|-||Reagent and sample addition during routine is possible|
|-||Management of several reagent positions for a single reagent|
|-||Management of several reagent racks in the software for extended capacity|
|-||Cuvettes racks loader for 464 tests|
|-||Automatic loading and waste of cuvette racks|
|-||Refilling racks possible anytime|
|-||Rack return for cost effective work|
|-||Automatic level detection|
|-||Automatic calibration curve calculation|
|-||Measuring system with process monitoring|
|-||Error monitoring during signal treatment|
|-||Graphic display of clotting process|
|-||Continuous access to sample status|
|-||USB 2.0 connection|
|-||Light and sound alarms|
|-||8 reading channels|
|-||Automatic cuvettes racks loading and waste|
|-||Unique incubation technology|
|-||110 PT/h - Robust and fine design|
|-||Rack return for economic use|
|-||Performances kept at elevated room temperatures (tested up to 30°C)|
|-||32 sample positions|
|-||16 reagent positions|
|-||8 control and calibrator positions|
The New KENZA MAX BioChemisTry Analyser is a complete work-station for routine biochemistry analysis. The instrument has a 9-position built-in incubator and an automatic flow cell (18 µl), very useful for medium work-load.Thanks to the flow-cell storage hole, it is easy and quick to arrange reading through disposable cuvettes.
KENZA MAX BioChemisTry is an open system, which allows programmation of 120 methodologies through a friendly interface. The instrument can store calibration factors and reagent-blank values. It can store 30 QC values (on 2 levels for 30 analysis), with calculation of means, standard deviations, C.V.’s, and printing of Levey-Jennings diagrams.
Its built-in graphic printer allows the printing of different formats: with headlines, reference values, settings of parameters,… , Instrument can print the reaction plots (for kinetic methods) or calibration plots (for multistandard methods) as well. Printing report by ID No and name of the patient (needs a PC standard keyboard not supplied).
|Flow cell||18 µl|
|Minimum volume per test||500 µl (flow cell: 350 µl)|
|Wavelength||8 interferential filter positions: 340, 380, 405, 505, 546, 578 and 630 nm, + 1 free position|
|Measuring range||From -200 to +2500 mAbs|
|Photometric accuracy||CV < 1% to 2000 mAbs|
|Photometric linearity||± 1%|
|Reproductibility||± 1% from 0 to 2000 mAbs|
|Incubator||9 positions, from 20 to 40°C|
|Printer||24 columns build-in graphic printer|
|Power supply||220 V, 50 Hz, or 110 V, 60 Hz|
|Net dimension||35 cm X 34 cm X 24 cm|
|Gross dimension||47,5 cm X 45 cm X 45 cm|
|Net weight||7 kg|
|Gross weight||10 kg|
|Measuring method||Opto-mechanical (optical and mechanical).|
|Operating voltage||110/220 V 50–60 hz.|
|Power consumption||30 VA.|
|Net Dimensions||33 cm x 25 cm x 11 cm.|
|Gross Dimensions||40,5 cm x 31 cm x 27,5 cm.|
|Net Weight||4,8 kg.|
|Gross Weight||6,8 kg|
|Printer||DPU414 KYOLINE / KYOSHA PRINTER|